We are still operating during CMCO period, and will ship your order ASAP. If you're unable to reach us by phone, drop us an email.
All Products
Sort by
Show result

Description:

100% brand new and high quality!

Military-grade double-layer circuit board design.

Comes with a heat sink.

Two-way high-power thyristor with a limit current of up to 100 amps.

Such as electric furnace, water heater heating, lighting dimming, small motor speed, electric iron temperature adjustment.

General household appliances or small factories are enough.

 

Specification:

Color: as shown

Use voltage: AC 220V

Maximum power: 10000W Resistive load limit power, room temperature is recommended for 5000W for a long time

Voltage regulation: 0-220v starts at around 20

Size(approx): 130*60*47mm

Package: 

1 pc x Voltage Regulator

 

#Voltage #Regulator #AC #220V #10000W #SCR #Motor #Speed #Home #Electronic #Parts #High #Power #Controller #Heat #Sink

RM39.50

Glue Gun/Gam Tembak/Pistol Gam

Package Included: 1* hot glue gun

 

PRODUCT DETAILS :

~Professional Mini electric heating hot melt glue gun

~Perfect for glass, metal, wood, card, Plastic, Ceramic etc

~Compact and Strong

~Power :20w

~Color: Blue

 

Note :

1. Due to difference between different monitors, the picture may not reflect the actual colour of the item.

2. Due to personal measurement technique is different, there may be 0.5 - 1 cm error of the physical.

3. Non-returnable, Non-refundable on minor defect.

 

Thank you. 

 

MAKLUMAT PRODUK :

~ Pistol pelekat panas elektrik mini

~ Sesuai untuk kaca, logam, kayu, kad, plastik, seramik dll

~ Ringkas dan Kuat

~ Kuasa: 20w

~ Warna: Biru

 

Nota :

1. Oleh kerana perbezaan antara monitor yang berbeza, gambar mungkin tidak menggambarkan warna sebenar item tersebut.

2. Oleh kerana teknik pengukuran peribadi berbeza, mungkin terdapat kesalahan fizikal 0.5 - 1 cm.

3. Tidak dapat dikembalikan pada kecacatan kecil.

 

Terima kasih.  

 

#readystock #gluegun #hotgluegun #pistol #gum #20w #pistolgam #gamtembak 

RM6.99

Descriptions:

This IIC Serial I2C LCD Adapter Board, can be connected to a standard HD44780 compatible 16×2 or 20×4 Character Display Module that supports 4 bit mode. All Character Modules sold on our site support 4 bit mode, and nearly all commercially available 16×2 and 20×4 line character modules support it too.

 

This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574”. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address).

 

Features IIC/I2C :

*   Arduino 1602 I2C interface 4-wire 1602 screen.

*   IO port of Arduino control board is only 20, so IO ports is not enough for many sensor, SD card, relay modules.

*   The original 1602 screen need 7 IO ports to drive up, and this module can save 5 IO ports

*   This is another great IIC/I2C/TWI/SPI Serial Interface. With this I2C interface module, you will be able to transfer data via only 2 wires. If you already have I2C devices in your project, this LCD module actually cost no more resources.

*   I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)

*   Supply voltage: 5V

*   The backlight and contrast is adjusted by potentiometer

*   Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable

*   Compatible with 1602 LCD

 

Package includes :1x I2C Adapter for 1602 or 2004 Character LCD

 

Download library for I2C LCD display

https://github.com/johnrickman/LiquidCrystal_I2C

 

#lcd1602 #lcdi2c #arduinolcd #arduinolcdi2c #lcd1602i2c #lcdi2c1602 #i2c #arduino #lcd2004

RM3.40

Can be connected to 3.5-inch IDE parallel desktop hard drive, 2.5-inch IDE parallel laptop hard drive, 2.5/3.5-inch SATA serial laptop/desktop hard drive, DVD drive, DVD burning drive and other devices.

RM11.00

Descriptions:

The Infrared Barrier Module is able to adapt to the environment light very well. Having a pair of infrared transmitter and receiver tube, the transmitter consistently emits a certain frequency. When an obstacle with reflective surface is encountered, the infrared reflected back is received by the receiver & sent to the comparator circuit for processing. The green light will lit and output digital signal (low). The detection range can be adjusted via the potentiometer knob.

 

#Outdoor #obstacleavoidancesensor #Cars #Robot #smartphonecarmount #modular #lm393 #infraredobstacleavoidance #Sensors

RM2.05

Description for Intelligent Universal 18650 Battery Charger:

Smart Speedy Battery Charger with USB Port for 3.7V Li-ion Rechargeable Battery.

The product has four independent charging channels, it can charge four lithium batteries at the same time.

The charger will display the status of each rechargeable battery when charging.

Automatically detects battery power status and displays charging progress, and automatically stops charging when complete.

You can charge various 3.7V battery 26650, 22650, 18650, 18490, 18350, 17670, 17500, 16340, 14500, 10440.

Don't support to charger Alkaline battery.

 

Safe Charging

1.Overcharge Protection: It will stop charging automatically when charging completed.

2.Over temperature protection: Features temperature monitoring to prevent overheating.

3.Short-circuit protection.

4.Made from durable ABS (fire proofing/flame resistant).

 

Specifications:

1. Input: DC 5V 1-2A

2. Output Voltage: DC 4.2V

3. Output Current: 1000mA

4. Product Size: 90*30*122mm

Package includes:1pcs x USB Universal Charger

 

#Universal #18650 #14500 #26650 #Battery #Charger

RM14.60

Features:

General use for 910 binding posts.

Voltage higher than 1KV below.

Current is less than 5A.

Breadboard fixing hole dia.8mm.

4 mm banana plug can be inserted

RM0.60

100% Brand new and high quality

Can be used on most mini RC helicopters and indoor 3D planes

Great for small LiPo and NiMh connections

RM0.80

JT308 USB 125KHz RFID Card Reader

Specification:

Support µEM4001, 4100, or its compatible RFID, ID card.

Frequency: 125Khz

Read first 10 digits of the RFID/Proximity card.

Support Windows95/98/2000/XP/7/8/10.

Communication speed: 106Kbit/s

Power: DC 5V(±5%)

Reading distance: 5-8cm

Interface: USB

Operating temperature: -10? ~ +70?

Storage temperature: -20? ~ +80?

size: L × W × H) 10.8x7.8x2.8cm

Weight: 70g. with USB Cable: 100g

Color: black ( The same as the web photo )

 

Installation Instructions:

First: Connect the usb cable with the card reader to the computer USB port.

Second: The reader will 'drip' sound and flash about that power successfully, and then half a second after the 'drip' sound and flash about that device self-test successfully, without Install any drivers, windows will automatically recognize it.

Third: Open EXCEL or WORD ,the card number would be input by self .

 

Package include: 1 x new USB ID card reader + 1x USB cablle

 

#USB #RFID #Reader #JT308 #Card #ID

RM23.90

650nm Laser sensor Module 6mm 5V 5mW Red Laser Dot Diode Copper Head KY-008

Descriptions:

This 5V laser head is very easy to use, you can use Arduino control, make controllable laser pointer, theft detection, etc. interesting application devices.

As long as the laser can not point to itself or other eyes, even if the box is closed, the laser will have to open the possibility of error.

The laser is not a toy, does not give children, mental shortage, for people who do not know the use of laser characteristics, in this case, it can easily lead to injury.

The use of lasers must wear special glasses, for the invisible laser, this point is especially important.

The laser cannot shine on vehicles, airplanes and other transportation vehicles.

Condition: New Operating

Voltage :5V

Output wavelength 650 nm 3 pins module

With fixed bolt hole for easy installation

Color: show as pictures

PINOUT

1 – GND

2 – 5V

3 – S (Control: HIGH = Laser on);

 

Package Included: 1* KY-008 Laser Sensor Module

 

#KY-008 #Laser #Sensor #Module

RM2.00

L298N Dual H Bridge Motor Driver.

Motor controller breakout board which is typically used for controlling speed and direction of motors.

Dual-channel H-bridge driver working mode creates higher working efficiency.

L298N as main chip

It has strong driver capability, after flow protection diode, more stable and reliable

 

#l298n #motordriver #arduinol298n #motor #driver #l293d #dcmotor

RM5.90

L7805CV L7806CV L7808CV L7809CV L7812CV L7815CV L7824CV Transistor Triode

 

Package Include : 1pc * L7805CV/L7806CV/L7808CV/L7809CV/L7812CV/L7815CV/L7824CV Transistor

 

#Transistor #Triode

RM0.60

Specification:

16 x 2 characters LCD display

Blue backlight white character

Built in controller (HD44780 or equivalent)

 

Attachment:

http://www.engineersgarage.com/electronic-components/16x2-lcd-module-datasheet#

 

Arduino Tutorial:

https://www.arduino.cc/en/Tutorial/HelloWorld

 

Package Included: 1pcs * LCD 1602 (2x16) Basic Character Blue Backlight Display LCD1602

 

#LCD #1602 #LCD1602 #arduino

RM8.40

It can automatically recongize 12V or 24V, Lead acid and Gel battery.
Maximum Solar Voltage for 12V Battery is 25V; 24V Battery is 50V

Maximum Solar Watt for Model as show below
10A: 12V 120W; 24V 240W
20A: 12V 240W; 24V 480W
30A: 12V 360W; 24V 720W

Features:
Build-in industrial micro controller.
Big LCD display with adjustable parameter.
Fully 4-stage PWM charge management.
Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
Dual mosfet Reverse current protection ,low heat production.

RM15.00

- 3mm round head general use LED

- Class A grade - Constant luminous

- Available in red, yellow, blue, green, white color - Can direct drive by Arduino

RM0.75