We are still operating during CMCO period, and will ship your order ASAP. If you're unable to reach us by phone, drop us an email.
All Products
Sort by
Show result

Features:

It is another great blue backlight LCD display.

As the pin resources for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card.

With this I2C interface LCD module, you will be able to realize data display via only 2 wires.

If you already has I2C devices in your project, this LCD module actually cost no more resources at all.

It is fantastic for Arduino based project.

 

Specifications:

Material: electronic element

Color: black & green

Size: 150*100mm

Package Includes: 1 x LCD Keypad Shield Board 1602

LCD main technical parameters:

Display Capacity: 16 × 2 character Chip

Operating voltage :4.5-5 .5 V

Working current: 2.0mA (5.0V)

Module optimum operating voltage:5.0V

Module size:20.5mm × 41mm/0.81 x 1.61 inch

Module Weight:57g 1602

 

#Arduino #LCD1602 #LCD #screen #board #LCD #Keypad #Shield

RM10.70

NEW Arduino Compatible ATMEGA328P Nano V3.0 + USB Cable

Microcontroller ATmega328P

 

Technical Parameters:

Using Atmel Atmega328P MCU

8 Analog input ports: A0 ~ A7

14 Digital input / output ports: TX, RX, D2 ~ D13

6 PWM ports: D3, D5, D6, D9, D10, D11

1 Pair of TTL level serial transceiver ports RX / TX

DC Current per I/O pin: 40Ma

Flash Memory: 32KB

SRAM: 2KB

EEPROM: 1KB

Clock Speed: 16MHz

There is bootloader installed in it

Support USB download and Power

Support for external 5V ~ 12V DC power supply

Support power supply by 9V battery

Support ISP download

Dimensions: 0.73”x1.7”, 45(L)x18(W)mm

 

Usage:

Download The open-source Arduino Software (IDE) Windows & Mac OS https://www.arduino.cc/en/Main/Software

Package Include : 1* Arduino Compatible Nano with ATMEGA328P Module + Cable

 

#arduinonano #arduinouno #arduinonanoatmega328p #atmega328p #arduino

RM14.20

Rated Load: AC 250V 3.0A  or AC 125V 6.0A

Contact Resistance: <= 0.05 Ohm

Insulation Resistance: >= 100 MOhm (min)

Withstand Voltage: AC 1500V 50Hz 1min

RM0.50

Description:

1. the main chip: ISD1820

2. size: 38mm * 42.5mm

3. the working voltage: DC 3 ~ 5V

4. the main features

(1) easy to use 10 seconds of voice recording

(2) high-quality, natural voice restored

(3) can be used as propaganda module

(4) with looping, jog playback, single-pass play function

(5) available single-chip control

(6) this module can directly drive a small speaker 8 ohm 0.5W

 

User Manual:

http://hackerstore.nl/PDFs/EIM353_ISD1820_Module_Manual_V01.pdf

Quick Start Tutorial:

http://www.elecfreaks.com/wiki/index.php?title=Voice_Record_Module_-_ISD1820

Package Include: 1*Arduino Voice Record Sound Module ISD1820 with speaker

#ISD1920 #recording #voice #Speaker #Component

RM6.50

This wireless remote control is 330MHz/433MHz frequency commonly use for Autogate, Garage door opener or Alarm system.

 

#Autogate #AutogateRemote #RemoteControl #SMC5326 #Remote330MHz #Remote433MHz #WirelessRemote #WirelessRemoteControl #AutogateRemoteControl

RM10.00

This music receiver is used in almost all of the audio receiver which can be used with input plug, including automotive devices. You can then hear the music received from your smartphone and MP3 to the speakers at home or in-car sound system. Enjoy the ultimate car music and call solutions. Using smart phones to make calls and listen to music through the car stereo. Touch the button of speakerphone, listen to music stored in the phone's music and even play Internet radio. The product with embedded echo canceling microphone, you can only use one button to easily switch between music and phone.

RM11.00

Description:

Bluetooth module HC-05 Master and slave Two in one module.

Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.

6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your for Arduino Board.

HC-05 Bluetooth module provides switching mode between master and slave mode which means it able to use either receiving or transmitting data.

With this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.

 

Specifications:

Material: metal.

Size: 26.7*13mm.

Color: show as pictures.

 

Package include: 1 * HC-05 Module.

 

#HC-05 #Wireless #Module #Anti-reverse #RF #Transceiver #Wireless #Bluetooth #Serial #Board

RM22.50

Description:

65pcs Male to Male Jumper Wire cable kit for Solderless Breadboard Arduin.

Including 49 pcs 105mm (4.1") & 8 pcs 140mm (5.5") & 4 pcs 185mm (7.3") & 4 pcs 225mm (8.9") long cable.

Can be used for PCB project, PC motherboard, etc. Can be used to jumper between any female headers or between two points on the breadboard.

Best for electronic DIY project.

100% brand new and high quality.

High quality 65 piece breadboard jumper kit

Flexible, durable, reusable, easy to trace

Easy to connect and disconnect

 

Specification:

Type: Breadboard Jumper Cable

Color: Multicolored

Material: Plastic, Electronic Part

Size: 11cm-24cm

Quantity: 65pcs

Package Included:  1*65pcs Root Breadboard Cables

 

#breadboardjumperwire #breadboardjumpers #breadboardjumpercable #breadboardjumperwirekit #breadboardwirekit

RM5.50

The 10A voltage and current meter itself has a built-in shunt, and the 50A / 100A voltage and current meter needs to be purchased separately (the above options can be checked for purchase).

The power supply voltage of the meter must be 4--30V. If it exceeds 30V, DU stand-alone power supply is required. Please connect according to the figure. The four points of the shunt cannot be changed .

Digital display meter and shunt are used together, 10A can not be used with 50A. 100A shunt.  

 

#DC #0-100V #10A #50A #100A #LED #DC #Dual #Display #Digital #Current #Voltage #Meter #Ammeter #Voltmeter

RM9.38

DC 5V-120V Digital Voltmeter Panel Gauge 2 Wires 0.56 inch LED Mini Voltage Meter Table Red Green Blue Display

 

Features:

This voltmeter is suitable for almost all electric vehicles with high precision and stability.

High precision

Reverse protection and then flameproof.

 

Technical Parameters:

Measuring range: red DC5-120.0V, green DC5-120.0V, blue DC5-120.0V

Power range: no additional power supply required, directly using the measured voltage as a power supply

Maximum input: DC132V.

Tolerance: ±1%

Input impedance: > 100K Europe

Operating current red <23mA, green <18mA, blue <13mA

Refresh rate: about 300mS once

Display: three 0.56 inch LED digital tube

Display color: red, green, blue

Lead length: 20cm

Dimensions: 48 x 29 x 22 mm (length X width x thickness)

Hole size: 46 x 27 mm

Net weight: 18g

Gross weight: 25g

Working temperature: -20 ° C ~ 65 ° C

Note: Input voltages above 132V may be permanently damaged!

 

Package Include : 1pc * Digital Voltmeter

 

#DC #5V #120V #Digital #Voltmeter #Panel #Gauge #2 #Wires #0.56 #inch #LED #Mini #Voltage #Meter #Table #Red #Green #Blue #Display

RM6.00

+ Nominal voltage: 3V to 6V

+ Maximum Speed: 12800 RPM

+ Torque: 5.9 g / cm

+ Motor Body Size: 25mm x 21mm x 15mm

+ Shaft Size: 9mm x 2mm diameter

RM1.40

Descriptions:

MT3608 DC-DC Step Up Converter Booster Power Supply Module Boost Step-up Board MAX output 28V 2A

1.Electrical characteristics

1). The maximum output current: 2 a

2). The input voltage: 2 v ~ 24 v

3). The maximum output voltage: 28 v

4). Efficiency: >93%

 

2.Mechanical properties

1). Product size: 36 mm * 17 mm * 14 mm

 

3.Method of use

1). The module of the IN+ and - after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage

 

4.Matters needing attention

1). The input voltage should not exceed the maximum input voltage

2). The peak current output current is no more than TV university

 

Package Included: 1 x MT3608 DC-DC Step Up Power Apply Module Booster Power Module MAX output 28V

 

#MT3608 #DC-DC #Step Up #Converter #Booster #Power #Supply #Module #Boost Step-up #Board #MAX #output #28V #2A

RM4.00

Description:

Features metal material, silver tone, 2.1mm x 5.5mm DC socket power plug Audio Connector.

Made of duarable metal material, it is a good replacement for old and damaged ones.

Metal Material : Metal

Operating temperature range : -30-70 ° C

Rated load: DC 30V 5A 

Contact resistance :≤0.03Ω

Insulation resistance :≥100MΩ

Withstand voltage : AC 500V (50Hz) / min 

Insertion and extraction force :3-20N

 

Package Included: 1 * DC099 Power Jack Socket Female Panel Mount

 

#DC099 #Power #Jack #Socket #Female #Panel #Mount

RM2.30

New DC3V-6V DC Geared Motor TT For Robot Smart Car Chassis DIY Anti-interferen E

Features:

Use scope: scientific electronic products, robot electric body, bubble gun toy gun body, 4WD toy car, toy plane class, class products such as vibration electric toy products

[product] straight bi-axial reducer motor

[type] 1; 48 [

description] with strong magnetic, anti interference

Voltage no-load current no-load speed

6V = 200mA 200 + -10% rpm

3V = 150mA 90 +- 10% rpm

Package Include: 1 x dual shaft gear motor

 

#TT #DC #E #DC3V-6V #Car #Geared #For #Chassis #Motor #Smart #Robot #Anti-interferen #DIY #New #Chassis-DIY #DC3V-6V-DC #Robot-Smart #Geared-Motor

RM3.20

Description:

DHT22 output calibrated digital signal.

Utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability.

Sensing elements is connected with 8-bit single-chip computer. 

Every sensor of this model is temperature compensated and calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of programme in OTP memory, when the sensor is detecting, it will cite coefficient from memory.

Small size & low consumption & long transmission distance(20m) enable DHT22 to be suited in all kinds of harsh application occasions.

Single-row packaged with four pins, making the connection very convenient

 

DHT22:

Low cost

3 to 5V power and I/O 2.5mA max current use during conversion (while requesting data)

Good for 0-100% humidity readings with 2-5% accuracy

Good for -40 to 80°C temperature readings ±0.5°C accuracy

No more than 0.5 Hz sampling rate (once every 2 seconds)

Body size 15.1mm x 25mm x 7.7mm

4 pins with 0.1" spacing

Package Includes: 1* DHT22

 

#dht #dht22 #humiditymodule #temperaturesensor

RM15.10